Volume Control On Multi Output Device For Mac. Eaglefiler 1 8 8 Download Free. Iseki 3 Cylinder Diesl Engine Service Manual. Escape From Tarkov M4 Modding. Cadence 16.3 License Crack. Winchester Cooey 600 Owners Manual. Acrok Hd Video Converter For Mac 7. Buenos Aires, Argentina based DJ, producer Jonyx debuts with us on Cylinder with a solid two tracker titled Ying & Yang. Known for his DJing, Jonyx is relatively new to the world of producing, and so far we've been impressed with the quality and craftsmanship he has shown. Cylinder Capacity 3780 cm3 3780 cm3 5675 cm3 5675 cm3. In skylines, average of 3-4 workers are worked according to land conditions of loading area.
- Mainstage 3 4 4 Cylinder
- Mainstage 3 4 4 Cylinder Reviews
- Mainstage 3 4 4 Cylinder Motor
- Mainstage 3 Pc
- Mainstage 3 4 4 Cylinder Order
135369 Adjuster Screw Main Stage ID Plate Spool Main Stage Spool Type 0 1 2 3 4 6 8 9 11 31 33 52/521 A/B/C/F/N C 363495.296.226 399. 15-1 Cylinder head, removing and replacing WARNING! Do not re-use any fasteners that are worn or deformed in normal use. Some fasteners are designed to be used only once, and are unreliable and may.
- Jocelyn Grant
- 5 years ago
- Views:
Transcription
1 15-1 Cylinder head, removing and replacing WARNING! Do not re-use any fasteners that are worn or deformed in normal use. Some fasteners are designed to be used only once, and are unreliable and may fail if used a second time. This includes, but is not limited to, nuts, bolts, washers, circlips and cotter pins. Always follow the recommendations in this manual-replace these fasteners with new parts where indicated, and any other time it is deemed necessary by inspection. Notes: The cylinder head can be removed and installed without removing the engine from the vehicle. When replacing the cylinder head, the engine coolant must be completely replaced. Checking compression Page
2 When installing a replacement cylinder head complete with camshaft, the contact surfaces between the hydraulic valve lifters and the cam lobes must be lubricated after installing the cylinder head. The plastic liners supplied on replacement cylinder heads for protection of open valves must not be removed until just before installing the cylinder head.
3 15-2 Metal cylinder head gasket From all 1.9 liter Diesel engines are equipped with a new metal cylinder head gasket with silicone coating. When making repairs it is no longer necessary to tighten the cylinder head bolts by an additional 1/4-turn (90 ) with the engine warm. The four-step procedure for tightening the cylinder head bolts during assembly has not changed. When installing a new metal cylinder head gasket, follow all precautions Notes Page Note: The new metal cylinder head gasket can be installed on all 1.9 liter Diesel engines manufactured before
4 15-3 Cylinder head, disassembling and assembling 1 - Expanding clip 2 - Toothed belt guard, upper 3 - Toothed belt Mark running direction before removing Check for wear Do not kink Removing and installing: Engine code 1Z Page Engine code AHU Page Nm (33 ft lb) 5 - Camshaft sprocket Drive off camshaft taper using hammer and drift through toothed belt guard opening 6-10 Nm (7 ft lb) 7 - Toothed belt guard, rear 8 - Cylinder head cover 9 - Cap Replace seal if damaged
5 Upper sealing washer Replace if damaged 11 - Cup washer 12 - Cap 13 - To intake hose 14 - Retaining clip 15 - Positive Crankcase Ventilation (PCV) valve 16 - Gasket For crankcase breather Replace if damaged 17 - Cylinder head cover gasket Replace if damaged Insert projections into holes on cylinder head 18 - Crankcase breather 19 - Cylinder head bolt Always replace Follow instructions for loosening and tightening in proper sequence Page 15-9
6 20 - Mounting clip
7 O-ring Always replace 22 - Lower sealing cone 23 - Injector lines 25 Nm (18 ft lb) Remove using 3035 injector line wrench Always remove fuel lines as an assembly Do not bend or alter shape 24 - Cylinder head Check for distortion Fig. 1 Installing Page 15-9 After replacing, engine coolant must be completely replaced 25 - Fuel injector Removing and installing: Engine code AAZ Repair Manual,1.9 Liter 4-Cyl. 2V Eco-Diesel Fuel Injection & Glow Plug, Engine Code(s): AAZ, Repair Group 23 Engine codes 1Z, AHU Repair Manual, 1.9 Liter 4-Cyl. 2V TDI Fuel Injection &
8 Glow Plug, Engine Code(s): 1Z, AHU, Repair Group 23
9 Glow plug Engine code AAZ: Tightening torque: 25 Nm (18 ft lb) Checking Repair Manual, 1.9 Liter 4-Cyl. 2V Eco-Diesel Fuel Injection &Glow Plug, Engine Code(s): AAZ, Repair Group 28 Engine codes 1Z, AHU: Tightening torque: 15 Nm (11 ft lb) Checking Repair Manual, 1.9 Liter 4-Cyl. 2V TDI Fuel Injection & Glow Plug, Engine Code(s): 1Z, AHU, Repair Group Lifting eye 28 - Cylinder head gasket Always replace New metal gasket from Page 15-2 Note marking Fig. 2 After replacing, engine coolant must be completely replaced
10 Nm (15 ft lb) 30 - Idler roller Engine codes 1Z, AHU Nm (18 ft lb) 32 - Semi-automatic toothed belt tensioning roller Engine codes 1Z, AHU: checking Eccentric Engine codes 1Z, AHU Page For semi-automatic toothed belt tensioning roller 34 - Tightening torque Engine code AAZ: 45 Nm (33 ft lb) Engine codes 1Z, AHU: 20 Nm (15 ft lb)
11 15-8 Fig. 1 Checking cylinder head distortion Maximum permissible distortion: 0.1 mm ( in.) CAUTION! Resurfacing Diesel engine cylinder heads is not permissible. Fig. 2 Different thickness cylinder head gaskets are available. The correct thickness depends on the amount of piston protrusion. Measuring piston protrusion Page When only replacing the cylinder head gasket, install a new gasket with the same identification. Note: Cylinder head gasket identification Part number (black arrow) Holes/notches (white arrow) New metal gasket, Page 15-2.
12 15-9 Cylinder head, installing Special tools, testers and auxiliary items VAG1332 torque wrench 40 to 200 Nm 3070 guide pins CAUTION! Always replace cylinder head bolts. Notes: During repairs, carefully remove seal/gasket fragments from cylinder head and cylinder block. Make sure that no longitudinal grooves or scratches are created. When using abrasive paper do not use a grade coarser than 100. Carefully remove any abrasive debris. Remove new cylinder head gasket from packaging, just before installing. Handle gasket extremely carefully. Damaging the silicone layer or the indented area can cause leakage.
13 New metal cylinder head gaskets can be installed on 1.9 liter Diesel engines manufactured before Page Turn crankshaft to TDC mark before installing cylinder head. - Turn crankshaft against engine direction of rotation until all pistons are approximately equally placed below TDC. Grids for instagram 6 0 1. - Install cylinder head gasket.
14 To center gasket, screw guide pins from 3070 into outer threaded holes on intake side. - Install cylinder head, thread in 8 remaining cylinder head bolts and tighten by hand. - Remove guide pins using removal tool from 3070 and install cylinder head bolts. - Tighten cylinder head bolts in four stage sequence as shown. (Loosen in reverse order): 1. Tighten initially using a torque wrench. Note: Stage I: 40 Nm (30 ft lb) Stage II: 60 Nm (44 ft lb) 2. Turn further using a hand wrench. Stage III: additional 1/4-turn (90 ) Stage IV: additional 1/4-turn (90 ) It is NOT necessary to re-torque cylinder head bolts after the first 1,000 km (600 mi).
15 15-11 Installation with older style head gasket ONLY - Tighten according to above four stage sequence. - After final assembly, run engine until completely warm-oil temperature at least 50 C (122 F)- and tighten bolts additional 1/4-turn (90 ). Do not loosen bolts first Follow tightening sequence Tighten each bolt in one step, without interruption It is NOT necessary to re-torque cylinder head bolts after the first 1,000 km (600 mi). All vehicles - After tightening cylinder head, rotate camshaft so cam for no. 1 cyl. points evenly upward. - Rotate crankshaft, in running direction of engine
16 to TDC before installing toothed belt.
Turbocharger system components, servicing
21-1 Turbocharger system components, servicing Engine codes: AAZ, 1Z, AHU Observe rules of cleanliness Page 21-10 Turbocharger hoses and lines, connecting Page 21-11 WARNING! Do not re-use any fasteners
More informationVolkswagen New Beetle 2.0 Liter 4-cyl General, Engine (Engine Code AEG) 15 Engine- Cylinder head, Valvetrain (Page GR-15)
15 Engine- Cylinder head, Valvetrain (Page GR-15) Cylinder head, removing and installing Compression, checking Valve train, servicing Camshaft oil seal, replacing Camshaft, removing and installing Hydraulic
More informationEngine, disassembling and assembling
13-1 Engine, disassembling and assembling Note: Replace the oil cooler and thoroughly clean the oil passages if you find metal shavings or larger quantities of small metal particles in the engine oil,
More information2003 Audi A4. AUDI' '3.0L V6 - AVK Engine - A4 & A6
Installation (A4) CAUTION: Before installation, ensure camshafts are aligned, crankshaft is locked in place and camshaft gear bolts are loose as described in removal procedures. When turning camshaft,
More informationCooling system components, servicing
19-1 Cooling system components, servicing WARNING! The cooling system is pressurized when the engine is warm. When opening the expansion tank, wear gloves and other appropriate protection, cover the cap
More informationVolkswagen Jetta, Golf, GTI 1999, 2000 2.8 Liter VR6 2V Engine Mechanical, Engine Code(s): AFP 17 Engine-Lubrication (Page GR-17)
17 Engine-Lubrication (Page GR-17) Lubrication system components, removing and installing Oil filter housing, disassembling and assembling Oil pan, removing and installing Oil pressure and oil pressure
More informationDiesel Turbo Direct Injection (TDI) system, servicing
23-1 Diesel Turbo Direct Injection (TDI) system, servicing The Diesel Direct Fuel Injection (DFI) Engine Control Module (ECM) is equipped with Diagnostic Trouble Code (DTC) memory. Before starting repairs,
More informationP7100 PUMP INSTALLATION INSTRUCTIONS Diesel Care & Performance Inc
P7100 PUMP INSTALLATION INSTRUCTIONS Diesel Care & Performance Inc Installation Timing Pin Location CAUTION: Before installing the injection pump, be sure that number 1 cylinder is at the Top Dead Center
More informationVolkswagen New Beetle 2.0 Liter 4-cyl General, Engine (Engine Code AEG) 17 Engine-Lubrication system (Page GR-17)
17 Engine-Lubrication system (Page GR-17) Lubrication system components, removing and installing Oil pan, removing and installing Oil pressure and oil pressure switch, checking Dynamic oil pressure warning
More informationREMOVAL AND INSTALLATION
303-01C-1 REMOVAL AND INSTALLATION Engine Body On Special Tool(s) Adapter For 303-D043 303-D043-02 or equivalent Special Tool(s) 303-01C-1 Turbocharger Lifting Bracket 303-1266 Wrench, Fan Clutch Nut 303-214
More informationDrive shaft, servicing
Volkswagen Passat B6 - Drive shaft, servicing Стр. 1 из 41 40-7 Drive shaft, servicing Drive shafts, overview I - Assembly overview: Drive axle with CV joint VL100 40-7, Drive axle with CV joint VL100,
More informationCooling system components, removing and installing
Engine BHW Cooling system components, removing and installing Page 1 / 24 19-1 Cooling system components, removing and installing Warning! When doing any repair work, especially in the engine compartment,
More informationMarine Diesel Engine VF4 VF5 VF4.140E VF4.170E VF5.220E VF5.250E. Service Manual
Marine Diesel Engine VF4 VF5 Service Manual VF4.140E VF4.170E VF5.220E VF5.250E Copyright 2009 Vetus N.V. Schiedam Holland Reproduction of text and illustrations, in whole or in part, is strictly prohibited.
More informationRear wheel brakes, servicing. Стр. 1 из 45. Note:
17 Engine-Lubrication system (Page GR-17) Lubrication system components, removing and installing Oil pan, removing and installing Oil pressure and oil pressure switch, checking Dynamic oil pressure warning
More informationREMOVAL AND INSTALLATION
303-01C-1 REMOVAL AND INSTALLATION Engine Body On Special Tool(s) Adapter For 303-D043 303-D043-02 or equivalent Special Tool(s) 303-01C-1 Turbocharger Lifting Bracket 303-1266 Wrench, Fan Clutch Nut 303-214
More informationDrive shaft, servicing
Volkswagen Passat B6 - Drive shaft, servicing Стр. 1 из 41 40-7 Drive shaft, servicing Drive shafts, overview I - Assembly overview: Drive axle with CV joint VL100 40-7, Drive axle with CV joint VL100,
More informationCooling system components, removing and installing
Engine BHW Cooling system components, removing and installing Page 1 / 24 19-1 Cooling system components, removing and installing Warning! When doing any repair work, especially in the engine compartment,
More informationMarine Diesel Engine VF4 VF5 VF4.140E VF4.170E VF5.220E VF5.250E. Service Manual
Marine Diesel Engine VF4 VF5 Service Manual VF4.140E VF4.170E VF5.220E VF5.250E Copyright 2009 Vetus N.V. Schiedam Holland Reproduction of text and illustrations, in whole or in part, is strictly prohibited.
More informationRear wheel brakes, servicing. Стр. 1 из 45. Note:
Volkswagen Touareg - Rear wheel brakes, servicing Стр. 1 из 45 46-2 Rear wheel brakes, servicing Rear brakes, FN 44 brake caliper, servicing Note: After replacing brake pads, depress brake pedal firmly
More informationDRIVE AND DRIVEN PULLEY
11 DRIVE AND DRIVEN PULLEY SCHEMATIC DRAWING ------------------------------------------------- 11-1 SERVICE INFORMATION------------------------------------------------ 11-2 TROUBLESHOOTING-----------------------------------------------------
More informationSTEERING SYSTEM - POWER
STEERING SYSTEM - POWER 1990 Nissan 240SX 1990 STEERING Nissan - Power Rack & Pinion Axxess, Maxima, Pulsar NX, Sentra, Stanza, 240SX, 300ZX DESCRIPTION The power steering system consists of a rack and
More informationTiming belt replacement intervals
Telephone: Fax: VAT Registration No.: Name: Address: Model: Year: 1994 Registration: Tel - Private: Tel - Business: Mileage: Job number: Important note Important note The intervals and procedures given
More informationCooling system components, removing and installing
Page 1 of 30 19-1 Cooling system components, removing and installing Notes: When the engine is warm the cooling system is under pressure. If necessary release pressure before commencing repair work. Secure
More informationSteering column, steering column tube and steering wheel, servicing
48-1 Steering column, steering column tube and steering wheel, servicing Airbag functional check and airbag On Board Diagnostic (OBD) program Repair Manual, Body-Exterior, Body- Interior, Repair Group
More informationENGINE FUEL FUEL FILTER.. FUEL HEATER.. INJECTOR.. SUPPLY PUMP.. COMMON RAIL.. FUEL PRESSURE LIMITTER..
FUEL FILTER.............. FUEL HEATER............. INJECTOR............... SUPPLY PUMP............. COMMON RAIL............. FUEL PRESSURE
More information2007 Hummer H3. 2007 BRAKES Disc Brakes - H3. Fastener Tightening Specifications Specification Application
2007 BRAKES Disc Brakes - H3 SPECIFICATIONS FASTENER TIGHTENING SPECIFICATIONS Fastener Tightening Specifications Specification Application Metric English Backing Plate Bolts 135 N.m 100 lb ft Brake Hose
More informationModel No: VS4815 1. SAFETY INSTRUCTIONS VS4800 2. INTRODUCTION & APPLICATIONS VS4815 3. CONTENTS. 2.1 Introduction. 2.
Instructions for: Petrol Engine Twin Camshaft Setting / Locking Tool Kit - (incorporating Vanos Alignment) - BMW N42 & N46 Engines Model No: VS4800 Associated kit: Camshaft/Carrier Bracket Remover & Installer
More information11. COOLING SYSTEM 11-0 COOLING SYSTEM BET & WIN 50
11 COOLING SYSTEM SERVICE INFORMATION------------------------------------------------ 11-1 TROUBLESHOOTING----------------------------------------------------- 11-1 RADIATOR ------------------------------------------------------------------
More informationVolkswagen Jetta, Golf, GTI 1999, 2000 Brake System 46 Brakes - Mechanical Components (Page GR-46)
46 Brakes - Mechanical Components (Page GR-46) Front brakes Brake pads, removing and installing Brake pads, removing and installing FN 3 brake caliper, servicing FS III brake caliper, servicing Rear wheel
More informationVolkswagen Jetta, Golf, GTI 1999, 2000 Brake System 47 Brakes - Hydraulic Components (Page GR-47)
47 Brakes - Hydraulic Components (Page GR-47) FS III front brake calipers, servicing Front brake caliper piston, removing and installing FN 3 front brake calipers, servicing Front caliper piston, removing
More informationCooling system components, removing and installing
Page 1 of 34 19-1 Cooling system components, removing and installing WARNING! The cooling system is pressurized when the engine is warm. When opening the expansion tank, wear gloves and other appropriate
More informationVolkswagen Golf 5 2004-> VW Rabbit GTI 2006->
Стр. 1 из 24 Volkswagen Golf 5 2004-> VW Rabbit GTI 2006-> 19-1 Cooling system components Warning! Hot steam may escape when opening expansion tank. Wear protective goggles and protective clothing to prevent
More information1993 VOLKSWAGEN ENGINES 2.5L 5-Cylinder. EuroVan
Article Text ARTICLE BEGINNING 1993 VOLKSWAGEN ENGINES 2.5L 5-Cylinder EuroVan * PLEASE READ THIS FIRST * NOTE: For engine repair procedures not covered in this article, see ENGINE OVERHAUL PROCEDURES
More informationSLP 1.85 Ratio Offset Rocker Arms with Valve Springs, LS3
PART #50190 SLP 1.85 Ratio Offset Rocker Arms with Valve Springs, LS3 PACKING LIST Before installation, use this check list to make sure all necessary parts have been included. ITEM QTY CHECK PART NUMBER
More informationUnit: mm(in) Item Standard value Service limit Axle shaft run out - 0.2(0.008)
Rear Wheel/Brake/Suspension 13. Rear Wheel/Brake/Suspension Service Information 13-1 Troubleshooting 13-2 Rear Wheel 13-3 Rear Cushion 13-4 Rear Swing Arm 13-7 Service Information General Safety If the Tal bassline 101 1 72 download free.
More information*Specify Oversize When Ordering
Cylinder Block Deck Cracks On Caterpillar 3208 Engines and Caterpillar explain how to inspect the Caterpillar 3208 engines for block cracks. Part No. Location Insert OD Size Depth Tapered ID 3906854 Intake
More informationFront brakes (FN- 3), servicing
j a t Front brakes (FN- 3), servicing 46-1 Front brakes, servicing Note: Install complete repair kit. After replacing brake pads and before moving vehicle, depress brake pedal several times firmly to properly
More informationSTORAGE, INSTALLATION AND MAINTENANCE PROCEDURES
GATE VALVE O.S. & Y 1.0 Periodic Inspections 1.1 The valve stem packing should be inspected at least monthly. If the stem packing shows signs of leakage, simply tighten the adjusting nuts to compress the
More informationCOOLING SYSTEM Section Page
5 COOLING SYSTEM Section Page 5.1 COOLANT PRE-HEATER.. 5-3 5.2 COOLANT PUMP NON-EGR ENGINE.. 5-7 5.3 COOLANT PUMP EGR ENGINE.. 5-13 5.4 FRONT CONNECTOR HOUSING NON-EGR ENGINE.. 5-17 5.5 FRONT CONNECTOR
More informationSTATE UNIVERSITY OF NEW YORK COLLEGE OF TECHNOLOGY CANTON, NEW YORK COURSE OUTLINE AUTO 220 INTERNAL COMBUSTION ENGINES
STATE UNIVERSITY OF NEW YORK COLLEGE OF TECHNOLOGY CANTON, NEW YORK COURSE OUTLINE AUTO 220 INTERNAL COMBUSTION ENGINES Prepared By: BRANDON BALDWIN CANINO SCHOOL OF ENGINEERING TECHNOLOGY AUTOMOTIVE TECHNOLOGY
More informationM113 VEHICLE FAMILY RUBBER TRACK INSTALLATION INSTRUCTIONS SOUCY TRACK SYSTEM 04-M113-1ENS (SPLIT IDLER) Litho d in Canada 1 04-M113-1ENS
M113 VEHICLE FAMILY RUBBER TRACK INSTALLATION INSTRUCTIONS (SPLIT IDLER) 1 # TABLE OF CONTENTS List of parts and tools........................3 Installation of complete kit..........................5
More information2740 Whitten Rd Bldg 103 Memphis, TN 38133 Telephone 901-380-9290 Email Bwilliams@Dieselcare.net
Fuel Injection Pump Replacement REMOVAL Diesel Care & Performance Inc 1. Disconnect negative battery terminal. 2. Remove throttle linkage. Fuel Injection Pump Bracket 3. Remove injection pump bracket.
More information#62192 Moroso Degree Wheel with Intake Center Line Calculator Instructions:
#62192 Moroso Degree Wheel with Intake Center Line Calculator Instructions: Items in Kit: 1-18 Inner Degree Wheel 2-20 Outer Degree Wheel 3- (4) Nylon thumb screws 4- (4) 10-32 Allen Head screws 5- (4)
More informationVS4760.V2. Instructions for: Diesel Engine Setting/Locking Tool Kit Renault dci Engines. Model No: 1. SAFETY INSTRUCTIONS
Instructions for: Diesel Engine Setting/Locking Tool Kit Renault dci Engines Model No: VS4760.V2 Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according
More informationChar-Lynn Hydraulic Motor. Repair Information. 10 000 Series. October, 1997
Char-Lynn Hydraulic Motor October, 1997 Repair Information Geroler Motor Two Speed 001 27 Retainer inside bore of valve plate bearingless motors only 4 15 16 3 6 35 Parts Drawing 25 2 2 1 19 17 36 40 47
More information13. REAR WHEEL/BRAKE/SUSPENSION
13. REAR WHEEL/BRAKE/SUSPENSION 13 3.5~4.5kg-m 8.0~10.0kg-m 0.8~1.2kg-m 3.0~4.0kg-m 2.4~3.0kg-m 3.5~4.5kg-m 6.0~8.0kg-m 13-0 13. REAR WHEEL/BRAKE/SUSPENSION 13 REAR WHEEL/BRAKE/SUSPENSION SERVICE INFORMATION..
More informationCAM-03, Camshaft Assembly Oil Seal Replacement
CAM-03, Camshaft Assembly Oil Seal Replacement Tools Jack stands Floor Jack Metric Socket set Metric Wrench set Porsche Timing Belt Tension tool (P9201) Flywheel Lock (P9206) Balance Shaft Pin Spanner
More informationPetrol Engine Twin Camshaft & Diesel Engine Setting / Locking Tool
Instructions for: Petrol Engine Twin Camshaft & Diesel Engine Setting / Locking Tool Kit Model No: VS4960 Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if
More informationREPAIR INSTRUCTIONS UNDER BODY CYLINDER (UM, UL)
Table of contents 1. Introduction.. 3 1.1. Scope of use.. 3 1.2. General remarks.. 3 1.3. Contact Hyva.. 3 1.4. Precautions.. 4 1.5. Spare parts.. 4 1.5.1. Prior to use.. 4 1.6. Recycling and Reuse
More informationFigure 2 Chrysler 2.4L head retorque
Recommended Engine Oil For 2004-2007 Chrysler Engines The following information refers to recommended engine oil for 2004-2007 Chrysler engines. This information should be considered any time the engine
More informationThe cylinder head bolts tightening stages have been updated as listed in Table 1.
NUMBER: 07 EPA04 MBE 4000-6 S.M. REF.: 1.2.2 ENGINE: MBE 4000 DATE: November 2007 SUBJECT: CYLINDER HEAD BOLTS TIGHTENING STAGES PUBLICATION: 6SE412 The cylinder head bolts tightening stages have been
More informationEngine. 204-1890 Strobe light, 110V 204-1891 Strobe light, 220V 204-458 Replacement bulb. 204-1057 Compression gauge. 204-166 Dial indicator
The Strobe light checks the unit for: Balance of operating machinery RPM of motors, engine pulleys, fans, etc. Observe belt slippage Strobe light will stop action at speeds from 200 to 6000 RPM 204-1890
More informationENGINE 4G1 SERIES CONTENTS GENERAL INFORMATION .. 1. SPECIFICATIONS.. 11A-1-1 SERVICE SPECIFICATIONS REWORK DIMENSIONS TORQUE SPECIFICATIONS ..
11A-0-1 ENGINE 4G1 SERIES CONTENTS GENERAL INFORMATION.. 11A-0-3 1. SPECIFICATIONS.. 11A-1-1 SERVICE SPECIFICATIONS REWORK DIMENSIONS TORQUE SPECIFICATIONS..... NEW TIGHTENING METHOD-BY USE OF BOLTS
More informationService. Engine. Engine Model: General Motors 4.3 L Powertrain. Generator Models: 30--45 kw TP-6103 1/01
Service Engine Engine Model: General Motors 4.3 L Powertrain Generator Models: 30--45 kw TP-6103 1/01 CAUTION Caution: In order to reduce the chance of personal injury and/or property damage, carefully
More information2001 Nissan Pathfinder LE 2001 ENGINES 3.5L V6
2001 ENGINES 3.5L V6 ENGINE IDENTIFICATION NOTE: For repair procedures not covered in this article, see ENGINE OVERHAUL PROCEDURES article in GENERAL INFORMATION. Engine can be identified by fourth character
More information1994 Volkswagen Corrado SLC
1994-98 ENGINES Volkswagen 2.8L 6-Cylinder ENGINE IDENTIFICATION NOTE: For engine repair procedures not covered in this article, see ENGINE OVERHAUL PROCEDURES - GENERAL INFORMATION article in the GENERAL
More informationCylinder head gasket, replacement
'VCC065612 EN 20110604' 1(7) Cylinder head gasket, replacement Special tools: 999 5098 Disconnect battery earth lead Drain coolant Remove heat shield over exhaust manifold. (Only the two bottom bolts on
More informationEM 58. 19. REMOVE NO. 2 MANIFOLD STAY (a) Remove the bolt, nut and stay.
57 ROVAL 1. DISCHARGE FUEL SYST PRESSURE (See page FU-9) 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery
More informationVolkswagen B3 Passat Manual Transmission 02A 34 Manual Transmission - Controls, Assembly (Page GR-34) 02A 5-speed. Gearshift cable/lever installing
34 Manual Transmission - Controls, Assembly (Page GR-34) 02A 5-speed Gearshift cable/lever installing Gearshift housing repairing Gearshift lever repairing lever/relay lever, installing Gearshift mechanism
More informationCYLINDER HEAD (4A FE)
EM81 CYLINDER HEAD (4AFE) COMPONENTS EM82 ENGINE MECHANICAL REMOVAL OF CYLINDER HEAD (See page EM81) 1. DISCONNECT CABLE FROM NEGATIVE TERMINAL OF BATTERY CAUTION: Work must be started after approx. 20
More informationNUMBER: 08 DD15-10 S.M. REF.: 3.2 ENGINE: DD15 DATE: September 2008
NUMBER: 08 DD15-10 S.M. REF.: 3.2 ENGINE: DD15 DATE: September 2008 SUBJECT: 3.2 OIL PAN PUBLICATION: DDC-SVC-MAN-0002 Oil pan section 3.2 has been updated. Section Change 3.2 Oil Pan Call-outs have been
More informationCooling system components, removing and installing
Volkswagen Touareg 3.2 - Cooling system components, removing and installing Page 1 / 24 19-1 Cooling system components, removing and installing Warning! Hot steam may escape when opening expansion tank.
More informationFire Hydrant Troubleshooting
Fire Hydrant Troubleshooting Pulsation or chatter during opening and flow of water from hydrant. Loose condition in stem at lower valve plate nut. Tighten lower valve plate nut and secure with SS lock
More informationTable of Contents. Overview 1. Pump Disassembly 2. Control Disassembly / Reassembly 7. Pump Reassembly 13. Adjustment Procedures DR Control 19
Table of Contents Overview 1 Pump Disassembly 2 Control Disassembly / Reassembly 7 Pump Reassembly 13 Adjustment Procedures DR Control 19 Adjustment Procedures DRG Control 20 Adjustment Procedures DFR
More informationIdentification and Specifications
Identification and Specifications General Specifications Item Specification Type Peugeot XUD9AI, 4 cycle, water cooled, 4 cylinder, vertical in-line cylinders, single overhead cam, indirect injection,
More informationTrouble Shooting. Pump
Trouble Shooting Pump Trouble Possible Cause Remedy Oil leaking in the area of water pump crankshaft Worn crankshaft seal, bad bearing, grooved shaft, or failure of retainer o-ring. Excessive play on crankshaft
More informationINSTALLATION INSTRUCTIONS MULTI-MOUNT KIT Part Number: 75330 Application: Warn HP PowerPlant P/N 71800
INSTALLATION INSTRUCTIONS MULTI-MOUNT KIT Part Number: 75330 Application: Warn HP PowerPlant P/N 71800 Your safety, and the safety of others, is very important. To help you make informed decisions about
More informationDiesel Care & Performance Inc Care is at the center of everything we do
Service and Repair REMOVAL WARNING: RED-STRIPED WIRE HARNESS CARRIES 115V DC. SEVERE ELECTRICAL SHOCK MAY BE RECEIVED. DO NOT PIERCE. CAUTION: Do not pierce engine electrical wires or damage to the harness
More informationAssembly overview - fuel tank
Assembly overview - fuel tank vw-wi://rl/n.en-gb.k02589829.wi::33090894.xml?xsl=3 Page 1 of 2 Assembly overview - fuel tank 1 - Fuel tank 2 - Sleeve When removing, support using engine and gearbox jack
Mainstage 3 4 4 Cylinder
More informationSkills Standards MEDIUM/HEAVY DUTY TRUCK: DIESEL ENGINE REPAIR TECHNICIAN OD32151 ALIGNED WITH ASE/NATEF
Skills Standards MEDIUM/HEAVY DUTY TRUCK: DIESEL ENGINE REPAIR TECHNICIAN OD32151 ALIGNED WITH ASE/NATEF Competency-Based Education: OKLAHOMA S RECIPE FOR SUCCESS BY THE INDUSTRY FOR THE INDUSTRY Oklahoma
More informationPISTON AND CYLINDER WALLS SCORING
PISTON AND CYLINDER WALLS SCORING Most instances of piston & cylinder scoring can be traced to lack of oil, use of improper oil fuel mixture, foreign particles in cylinder, heating caused by plugged cooling
More informationSystem Saver 318 Air Compressor for Mack E-Tech and ASET Engines
Maintenance Manual 31 System Saver 318 Air Compressor for Mack E-Tech and ASET Engines Revised 08-05 NON-THROUGH DRIVE THROUGH DRIVE Service Notes About This Manual This manual provides service and repair
More informationSection 7 Adjustment, Repair and Replacement
Section 7 Adjustment, Repair, and Replacement Page 7-1 Section 7 Adjustment, Repair and Replacement Section Contents Page Overview..7-5 Belts Belt Guard Removal/Installation..7-7 Belt Removal/Installation..7-11
More information18SP653* EPA04 and EPA98 MBE 4000 High Pressure Fuel Line and Transfer Tube Installation
18SP653* EPA04 and EPA98 MBE 4000 High Pressure Fuel Line and Transfer Tube Installation * - Rev. 9/24/08 KIT DESCRIPTION A service kit (P/N: A4600700135) is now available to install EPA07 high pressure
More informationHYBRID CAM PLATE AND HIGH VOLUME OIL PUMP KIT
-J056 REV. 0-05-0 HYBRID CAM PLATE AND HIGH VOLUME OIL PUMP KIT GENERAL Kit Number 584- Models For model fitment information, see the P&A retail catalog or the Parts and Accessories section of www.harley-davidson.com
More informationCooling system components
Page 1 / 33 19-1 Cooling system components Caution! When doing any repair work, especially in the engine compartment, pay attention to the following due to clearance issues: Route lines of all types (e.g.
More information1993 SUSPENSION Volkswagen Front. EuroVan
Article Text ARTICLE BEGINNING 1993 SUSPENSION Volkswagen Front EuroVan DESCRIPTION FWD independent suspension is an double-wishbone type with torsion bars mounted on upper control arm. Wheel is supported
More informationThe Crankshaft Oil Seal Section has been added to the DD15 Workshop Manual. The sections that are found in the Engine Chapter are now renumbered.
Mainstage 3 4 4 Cylinder Reviews
NUMBER: 08 DD15-5 S.M. REF.: 1.11 ENGINE: DD15 DATE: July 2008 SUBJECT: CRANKSHAFT OIL SEAL SECTION PUBLICATION: DDC-SVC-MAN-0002 The Crankshaft Oil Seal Section has been added to the DD15 Workshop Manual.
More informationENG-10, Camshaft (Timing) Belt and Balance Shaft Belt Tension - Checking and Adjusting
ENG-10, Camshaft (Timing) Belt and Balance Shaft Belt Tension - Checking and Adjusting Tools Jack stands Floor Jack Metric Socket set Metric Wrench set Porsche Timing Belt Tension tool (P9201) Thin 24
More informationPlanetary Drive Axles
Issued 07-00 $2.50 Planetary Drive Axles Maintenance Manual 9H PRLC 124 W2H PRLC 144 W2H Models PRLC 124 W2H PRLC 144 W2H Service Notes Service This Notes maintenance manual describes the correct service
More informationFZ6-ST FZ6-STC SUPPLEMENTARY SERVICE MANUAL LIT-11616-18-43 5VX-28197-11
FZ6-ST FZ6-STC SUPPLEMENTARY SERVICE MANUAL LIT-66-8-43 5VX-2897- FOREWORD This Supplementary Service Manual has been prepared to introduce new service and data for the FZ6-ST/FZ6-STC. For complete service
More information1.8 CRANKSHAFT OIL SEALS
SERIES 60 SERVICE MANUAL 1.8 CRANKSHAFT OIL SEALS An oil seal is fitted between each end of the crankshaft and the bores of the flywheel housing and gear case cover to retain the lubricating oil in the
More informationDYNA RIDER FOOTBOARD KIT
-J0 REV. 0-0-0 DYNA RIDER FOOTBOARD KIT GENERAL Kit Number 000 Models For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English
More informationVolkswagen B3 Passat General-Engine 4 CYL. 19 Engine - Cooling System (Page GR-19)
19 Engine - Cooling System (Page GR-19) Cooling system draining and filling general information Body components, layout Engine components, layout Radiator fan run-on checking Recommended mixture ratios
More informationWater Pump Replacement
1 of 8 2/5/2008 6:36 AM Document ID# 713637 2001 Cadillac Seville Print Water Pump Replacement Tools Required 1. J 38816-A Water Pump Remover & Installer 2. J 38185 Hose Clamp Pliers
More informationAdjustment Data MAZDA - 626-2.0 Comprex D - RF-CX
Adjustment Data MAZDA - 626-2.0 Comprex D - RF-CX Engine (general) Engine code RF Capacity 1998 (cc) Idle speed 725 ± 25 Valve clearance Valve clearance Cold Inlet 0.25 (mm) Exhaust 0.35 (mm) Compression
More informationTechnical Infos. Power Transmission Group
Technical Infos Power Transmission Group Find rather than search. Product Information Center All information on every ContiTech aftermarket product at a glance. Product Information Center www.contitech.de/pic
More information1 5 05-12 5 05-12. Additions, Revisions, or Updates
5 05-12 1 5 05-12 SUBJECT DATE Cylinder Head May 2012 Additions, Revisions, or Updates Publication Number / Title Platform Section Title Change DDC-SVC-MAN-0023 EPA04 MBE 4000 Cylinder Head Additional
More information2008 ACCORD - Front Knuckle/Hub/Wheel Bearing Replacement (page 18-13)
2008 ACCORD - Front Knuckle/Hub/Wheel Bearing Replacement (page 18-13) Exploded View Special Tools Required Ball joint remover, 28 mm 07MAC-SL0A202 Hub dis/assembly tool 07GAF-SD40100 Bearing driver attachment,
More informationFuel Injection Pump, Rotary (005-014)
Fuel Injection Pump, Rotary View Related Topic Page 1 of 30 Fuel Injection Pump, Rotary (005-014) Table of Contents Summary General Information Preparatory Steps Remove Front Gear Train Rear Gear Train
More informationCO-10 COOLING SYSTEM. Page DESCRIPTION TROUBLESHOOTING CHECK AND REPLACEMENT OF ENGINE COOLANT
CO-1 COOLING SYSTEM DESCRIPTION TROUBLESHOOTING CHECK AND REPLACEMENT OF ENGINE COOLANT WATER PUMP THERMOSTAT RADIATOR Page CO-2 CO-4 CO-4 CO-6 CO-10 CO-12 CO-2 COOLING SYSTEM - Description DESCRIPTION
More informationPOSEIDON 2-29, 2-25 & 2-22 POSEIDON 2-29, 2-25 & 2-22 XT
POSEION 2-29, 2-25 & 2-22 POSEION 2-29, 2-25 & 2-22 XT Repair Manual Index A. Safety precautions 3 B. Technical data 4 C. Structure 5-6. Service / Repair 7-23 E. Tools 24 F. Function 25-26 G. Electric
More informationAXLE SHAFTS - FRONT. 1998 Pontiac Bonneville MODEL IDENTIFICATION DESCRIPTION & OPERATION TROUBLE SHOOTING REMOVAL & INSTALLATION
AXLE SHAFTS - FRONT 1998 Pontiac Bonneville 1998-99 DRIVE AXLES FWD Axle Shafts - Cars - 'C', 'G' & 'H' Bodies GM Aurora, Bonneville, Eighty Eight, LeSabre, LSS, Park Avenue, Regency, Riviera MODEL IDENTIFICATION
Mainstage 3 4 4 Cylinder Motor
More informationService Manual Rol-Lift
R 2000 Service Manual Rol-Lift Series: T and E Developed by Generic Parts Service This manual is intended for basic service and maintenance of the Rol-Lift pallet jack. The pallet jacks you are servicing
More informationTABLE OF CONTENTS. iii
TABLE OF CONTENTS GENERAL INFORMATION 1 PERIODIC MAINTENANCE AND TUNE-UP PROCEDURES 5 ENGINE 9 LUBRICATION SYSTEM 24 FUEL SUPPLY SYSTEM 28 TRANSMISSION COMPONENTS 33 ELECTRICAL STARTING SYSTEM 36 BELT
More informationDO NOT attempt to repair hub and wheel bearing assembly.
Page 1 of 6 HUB & WHEEL BEARINGS (WITH PULSE VACUUM HUBLOCK) DO NOT attempt to repair hub and wheel bearing assembly. Removal DO NOT remove hub lock assembly by prying on hub lock legs. This can crack
More informationRebuild Instructions for 70001 and 70010 Transmission
Rebuild Instructions for 70001 and 70010 Transmission Brinn, Incorporated 1615 Tech Drive Bay City, MI 48706 Telephone 989.686.8920 Fax 989.686.6520 www.brinninc.com Notice Read all instructions before
More informationSECTION G2: CABLE PROCESSOR MODULE MAINTENANCE
SECTION G2: CABLE PROCESSOR MODULE MAINTENANCE Cable Processor Module overview WARNING! When tipping the Cable Processor Module back, (after removing the toggle arm pin), use extreme caution not to drop
More informationSERIES 60 SERVICE MANUAL
SERIES 60 SERVICE MANUAL The original air compressor is driven by the bull gear and water cooled. Postico 1 3 – a modern postgresql client interview. Engine coolant is fed to the compressor through a flexible hose tapped into the engine block water jacket
More informationMainstage 3 Pc
B1BBM2K1-806 DW10ATED ENGINE ENGINE INTRODUCTION DW10 1 - DESCRIPTION. Main structure of the DW10 engine :
of 23 http://www.christiantena.pwp.blueyonder.co.uk/motor/peugeot/hdi/b.. 7/12/2005 9:27 p.m. B1BBM2K1-806 DW10ATED ENGINE ENGINE INTRODUCTION DW10 1 - DESCRIPTION Main structure of the DW10 engine :
More informationTraining Syllabus to Instruct/Prepare for the ASE Transit Bus Diesel Engines Test
APTA STANDARDS DEVELOPMENT PROGRAM RECOMMENDED PRACTICE American Public Transportation Association 1666 K Street, NW, Washington, DC, 20006-1215 APTA-BTS-BMT-RP-005-10 Approved October, 2010 APTA Bus Maintenance
More informationARTICLE BEGINNING APPLICATION IDENTIFICATION DESCRIPTION LUBRICATION & ADJUSTMENT TROUBLE SHOOTING. MANUAL TRANSMISSIONS Saab 5-Speed Transaxle
Article Text ARTICLE BEGINNING MANUAL TRANSMISSIONS Saab 5-Speed Transaxle APPLICATION TRANSMISSION APPLICATION ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Vehicle Application Transmission
More informationMainstage 3 4 4 Cylinder Order
INSTRUCTIONS. FLHR/C/S (Road King) FRONT END LOWERING KIT 1WARNING -J03242 REV. 10-19-04. General. Removal (Left and Right Forks) Kit Number 54614-05
INSTRUCTIONS -J04 REV. 0-9-04 General FLHR/C/S (Road King) FRONT END LOWERING KIT This kit is designed for installation on 00 and later FLHR/C/S Model Motorcycles. Road King models use the conventional
More informationTITAN Fuel Tanks. INSTALLATION INSTRUCTIONS G e n e r a t i o n V
TITAN pt. no.: 02 0000 0143 Important: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION INSTRUCTIONS G e n e r a t i o n V Extended
More informationChapter 2 Part A: In-car engine repair procedures
2A 1 Chapter 2 Part A: In-car engine repair procedures Contents Camshaft - removal, inspection and refitting... See Chapter 2B Compression check............. See Chapter 2B Crankshaft rear
More information